What Are the Main Gold Cyanidation Methods Used Today?

2025-07-30

Gold cyanidation is a widely used hydrometallurgical process for extracting gold from ores. It involves dissolving gold into a cyanide solution, which is then recovered through precipitation or adsorption. The main gold cyanidation methods used today are:

1. Agitated Tank Leaching

• تەسۋىرلەش:: This is the most common cyanidation method for higher-grade ores. The ore is ground into fine particles, mixed with water to form a slurry, and then agitated in tanks with cyanide solution.
• Key Features:
  • High gold recovery rates (up to 95%).
  • Typically used for ores with fine gold particles.
• ئارتۇقچىلىقلار:
  • Controlled process with high efficiency.
  • Allows for the addition of oxygen or air to enhance gold dissolution.
• Disadvantages:
  • High capital and operating costs due to equipment and infrastructure requirements.

2. Heap Leaching

• تەسۋىرلەش:: Suitable for low-grade ores, heap leaching involves stacking crushed ore into a heap and irrigating it with a cyanide solution. Gold is dissolved as the solution percolates through the heap.
• Key Features:
  • Typically used for large, low-grade deposits.
  • Simpler and less costly than agitated tank leaching.
• ئارتۇقچىلىقلار:
  • Low capital and operating costs.
  • Good for large, remote, and low-grade ore bodies.
• Disadvantages:
  • Lower gold recovery rates (50–80%).
  • Longer processing time.
  • Potential environmental risks due to cyanide spills or leaks.

3. Carbon-in-Pulp (CIP)

• تەسۋىرلەش:: In this process, gold is dissolved in cyanide solution and then adsorbed onto activated carbon. The loaded carbon is separated and processed to recover gold.
• Key Features:
  • Commonly used for ores with fine gold particles.
• ئارتۇقچىلىقلار:
  • High gold recovery rates.
  • Efficient for processing finely ground ore.
• Disadvantages:
  • Requires more complex equipment compared to heap leaching.

4. Carbon-in-Leach (CIL)

• تەسۋىرلەش:: Similar to CIP, but the carbon is added directly to the leaching tanks, allowing simultaneous leaching and adsorption.
• Key Features:
  • Combines leaching and adsorption steps.
• ئارتۇقچىلىقلار:
  • Reduces processing time and cost.
  • High recovery rates, especially for ores with fine gold.
• Disadvantages:
  • Requires precise control and monitoring.

5. Merrill-Crowe Process

• تەسۋىرلەش:: A solution containing dissolved gold is clarified, deoxygenated, and gold is precipitated with zinc powder.
• Key Features:
  • Often used for high-grade ores or solutions with high gold concentrations.
• ئارتۇقچىلىقلار:
  • Produces high-purity gold.
• Disadvantages:
  • Requires large amounts of water.
  • Less suitable for low-grade ores.

6. Intensive Cyanidation

• تەسۋىرلەش:: Used for processing gravity concentrates or high-grade ores. The ore is subjected to cyanidation in small, highly controlled reactors.
• Key Features:
  • Suitable for concentrates or specific ore types.
• ئارتۇقچىلىقلار:
  • Very high recovery rates (up to 98%).
  • Fast processing time.
• Disadvantages:
  • High operational costs.
  • Requires specialized equipment.

7. Vat Leaching

• تەسۋىرلەش:: Crushed ore is placed in large vats or tanks and flooded with cyanide solution. The solution is drained and gold is recovered.
• Key Features:
  • Used for higher-grade, coarse ores.
• ئارتۇقچىلىقلار:
  • Good recovery rates.
  • Controlled process.
• Disadvantages:
  • Limited to small volumes of ore.
  • Requires large infrastructure.

مۇھىت ئاسراش

Cyanidation methods pose environmental and safety challenges due to the toxicity of cyanide. Modern techniques focus on:

• Cyanide detoxification (e.g., INCO/SO2 process).
• Recycling cyanide.
• Alternative lixiviants (e.g., thiosulfate or glycine leaching).

Each method is chosen based on factors like ore grade, deposit size, and economic considerations, with agitated tank leaching, heap leaching, CIP, and CIL being the most widely used.

Prominer (Shanghai) Mining Technology Co., Ltd. specializes in providing complete mineral processing and advanced materials solutions globally. Our core focus includes: gold processing, lithium ore beneficiation, industrial minerals. Specializing in anode material production and graphite processing.

Products include: Grinding & Classification, Separation & Dewatering, Gold Refining, Carbon/Graphite Processing and Leaching Systems.

We offer end-to-end services including engineering design, equipment manufacturing, installation, and operational support, backed by 24/7 expert consultation.

Our Website Url: https://www.prominetech.com/
Our Email: [email protected]
Our Sales: +8613918045927(Richard), +8617887940518(Jessica), +8613402000314(Bruno)