Why Do CIP Plants Fail with High-Copper Gold Ores?

2025-08-20

CIP (Carbon-in-Pulp) plants often fail with high-copper gold ores due to several challenges posed by the chemistry and behavior of copper in the gold extraction process. These challenges include:

1. Copper Adsorption on Activated Carbon

• Copper competes with gold for adsorption on activated carbon. In high-copper ores, copper is adsorbed onto the carbon, reducing the available sites for gold adsorption. This leads to lower gold recovery rates.
• Copper adsorbed on carbon may also lead to contamination of the gold-bearing carbon, complicating downstream processes like elution and electrowinning.

2. Formation of Copper Cyanide Complexes

• Copper reacts with cyanide to form stable copper cyanide complexes (\[Cu(CN)₂\]⁻, \[Cu(CN)₃\]²⁻, and \[Cu(CN)₄\]³⁻). These complexes consume significant amounts of cyanide, increasing reagent costs and reducing the free cyanide available for gold leaching.
• The presence of copper cyanide complexes reduces the effectiveness of the gold leaching process because cyanide is tied up in copper complexation.

3. High Cyanide Consumption

• High-copper ores lead to excessive cyanide consumption because copper reacts with cyanide to form copper cyanide complexes. This increases operational costs and may lead to cyanide depletion, negatively affecting gold recovery.

4. Copper Precipitation During Elution

• During the elution process (desorption of gold from carbon), copper adsorbed on the carbon is also desorbed. This can cause copper to precipitate in the elution circuit, fouling equipment and reducing efficiency.

5. Challenges in Electrowinning

• Copper cyanide complexes co-deposited during gold electrowinning reduce the purity of the gold cathode and may cause operational inefficiencies.
• High copper content in the electrolyte increases the energy consumption and maintenance requirements for the electrowinning process.

6. Passivation of Activated Carbon

• Copper adsorbed on the carbon surface can passivate the carbon, reducing its capacity to adsorb gold. This leads to lower gold recovery and costly carbon regeneration processes.

7. Environmental and Waste Management Issues

• High concentrations of copper cyanide complexes in the tailings stream complicate waste management and detoxification processes. This can lead to environmental compliance issues and higher remediation costs.

8. Increased Reagent Costs

• To counteract the effects of copper, additional reagents like lime, cyanide, or alternative lixiviants (e.g., glycine or ammonium thiosulfate) may be required. This increases the overall cost of the operation.

Mitigation Strategies

1. Pre-Treatment of Ores: Remove copper before leaching using methods like flotation or acid leaching.
2. Selective Elution: Use elution techniques that enhance gold recovery while minimizing copper desorption.
3. Alternative Lixiviants: Use non-cyanide leaching agents like glycine, which are selective for gold over copper.
4. Carbon Management: Employ carbon regeneration techniques to remove passivated copper and restore adsorption capacity.
5. Copper Recovery: Recover copper from the process stream using solvent extraction or ion exchange techniques.

ئەڭ مۇھىم قەيەر

High-copper gold ores introduce significant challenges to CIP plants due to copper’s interference in leaching, adsorption, and downstream processes. Addressing these issues requires a combination of ore-specific processing strategies and optimized plant operations to ensure economic and efficient gold recovery.

شىنجاڭ (شانخاي) مايىن تېخنىكا چەكلىك شىركىتى ئىنتايىن كەڭ كۆلەملىك مايىنەرلىك ئىشلەپچىقىش ۋە ئىلغار ماتېرىياللارنى جەھەننەم بويىچە تەمىنلەيدۇ. بىزنىڭ ئاساسلىق ئەھمىيەت بېرىدىغان تەرەپلەرگە: ئالتۇن ئىشلەپچىقىش، لىتىي رۇدا تەنقىت قىلىش، سانائەتلىك مايىنەرلىك ماددىلىرى. ئانود ماتېرىياللىرىنى ئىشلەپچىقىش ۋە گرافىت ئىشلەپچىقىشقا ئالاھىدە ئەھمىيەت بېرىدۇ.

مەھسۇلاتلارنىڭ قۇرامىغا: توغرىلاپ ئېزىش ۋە تەقسىملەش، ئايرىش ۋە سۇ چىقىرىش، ئالتۇن تەنقىت قىلىش، كۆمۈر/گرافىت ئىشلەپچىقىش ۋە ئېرىتىش سىستېمىلىرى كىرىدۇ.

بىز مۇھەندىسلىك لايىھىلەش، ئۈسكۈنىلەرنى ئىشلەپچىقىش، ئورنىتىش ۋە ئىشلەپچىقىش قوللىنىش قاتارلىق ئاخىرىغىچە خىزمەت قىلىمىز، بۇنىڭغا 24/7 كەسىپلىك مەسلىھەتچىلىك قوللايدۇ.

بىزىڭ تور بېتىمىز URL: https://www.prominetech.com/
بىزىڭ ئېلېكترونلۇق پورتىمىز:[email protected]
بىزىڭ سېتىش بۆلۈمى: +8613918045927 (رىچار)، +8617887940518 (جېسسىكا)، +8613402000314 (بىرۇنۇ)