How is scheelite mineral beneficiated for maximum tungsten recovery?

2025-09-18

Beneficiating scheelite ( (\text{CaWO}_4) ), a primary tungsten mineral, involves a series of processes aimed at maximizing tungsten recovery while minimizing impurities. The process generally involves a combination of physical and chemical methods, customized based on the ore’s composition, mineralogical characteristics, and economic considerations.

Here’s an overview of the scheelite beneficiation process for maximum tungsten recovery:

1. Ore Preparation: Crushing and Grinding

• উদ্দেশ্য: Reduce the ore to a fine particle size to liberate scheelite from the gangue minerals.
• পদক্ষেপসমূহ :
  • Crushing the ore to a manageable size.
  • Grinding the ore to achieve the required liberation size, typically around 0.2–0.5 mm (but depends on the mineral’s particle size).
  • Care is taken to avoid overgrinding, which can adversely affect the downstream processes.

২. মাধ্যাকর্ষিক পৃথকীকরণ

• উদ্দেশ্য: Exploit the high specific gravity of scheelite (~6.1) compared to the gangue minerals.
• পদ্ধতি:
  • টেবিল কাঁপানোএবংspiral concentrators are commonly used to separate scheelite particles.
  • Pre-concentration may be employed to discard a portion of unwanted gangue early in the process.

Gravity separation is effective for coarser particles, but its efficiency decreases for very fine fractions.

3. Froth Flotation

• উদ্দেশ্য: Further concentrate scheelite by separating it from silicate and sulfide impurities.

• Mechanism:

  • Scheelite is a calcium tungstate mineral and exhibits hydrophilic properties in its natural state, requiring surface modification for flotation.
  • Chemicals Used:
  • সংগ্রাহক: Fatty acids (e.g., oleic acid) are commonly used as collectors to make scheelite hydrophobic.
  • প্রতিরোধক: Soluble silicates (e.g., sodium silicate) and water glass suppress silicate and carbonate minerals.
  • pH পরিবর্তক: Adjusting to an optimal pH (usually 8–11) enhances separation efficiency.

  Various flotation reagents may be customized based on the ore’s composition.

4. Magnetic Separation (if needed)

• উদ্দেশ্য: Remove paramagnetic and ferromagnetic impurities (e.g., garnet or ilmenite) from the scheelite concentrate.
• যন্ত্রপাতি: High-intensity magnetic separators are often employed.

Scheelite itself is non-magnetic, but this step is useful when the ore contains magnetic contaminants.

5. Leaching and/or Roasting (Optional for High Purity)

• উদ্দেশ্য: Improve tungsten recovery and purity.
  • Ores with impurities like molybdenum sulfides may require intermediate steps, such as roasting or chemical leaching.
• Process Options:
  • Roasting to oxidize sulfide minerals.
  • Acid leaching to remove specific impurities.

6. Final Concentrate Filtration and Drying

• After the enrichment steps, the scheelite concentrate is filtered to remove excess water and dried to prepare it for downstream processing, such as tungsten extraction.

Key Considerations for Maximum Recovery

1. Ore Mineralogy: A detailed study of the ore (e.g., liberation size, mineral associations) helps optimize the beneficiation process.
2. Grade-Recovery Balance: Achieving maximum recovery without compromising the concentrate grade is essential for economic feasibility.
3. পরিবেশগত মান মেনে চলা: Minimize the environmental impact, especially with flotation and chemical usage.
4. Process Customization: Modifications to the process are often required for ore-specific challenges, such as high impurity levels or complex mineral compositions.

ফলাফল

• The final scheelite concentrate typically contains 60–70% tungsten trioxide ( (\text{WO}_3) ), suitable for smelting and further tungsten processing.
• Recovery rates vary, but well-optimized processes can achieve up to 80–90% tungsten recovery from the ore.

By carefully tailoring each step to the ore’s characteristics, the scheelite beneficiation process maximizes tungsten recovery while ensuring a high-grade concentrate.

প্রোমিনার (শাংঘাই) মাইনিং টেকনোলজি কোং, লিমিটেড খনিজ প্রক্রিয়াকরণ এবং উন্নত উপাদান সমাধান প্রদানের বিশেষজ্ঞ।

পণ্যগুলির মধ্যে রয়েছে: গ্রাইন্ডিং ও শ্রেণীবিন্যাস, পৃথকীকরণ ও জল নিষ্কাশন, সোনা পরিশোধন, কার্বন/গ্রাফাইট প্রক্রিয়াজাতকরণ এবং লীচিং সিস্টেম।

আমরা ইঞ্জিনিয়ারিং ডিজাইন, সরঞ্জাম উৎপাদন, ইনস্টলেশন এবং অপারেশনাল সাপোর্ট সহ সম্পূর্ণ পরিষেবা প্রদান করি, যা ২৪/৭ বিশেষজ্ঞ পরামর্শ দ্বারা সমর্থিত।

আমাদের ওয়েবসাইটের লিংক: https://www.prominetech.com/
আমাদের ইমেইল:[email protected]
আমাদের বিক্রয়: +৮৬১৩৯১৮০৪৫৯২৭ (রিচার্ড), +৮৬১৭৮৮৭৯৪০৫১৮ (জেসিকা), +৮৬১৩৪০২০০০৩১৪ (ব্রুনো)