When to Use Gravity vs. Flotation for Spodumene Recovery?

2025-11-23

The choice between gravity separation and flotation for recovering spodumene, a primary lithium-bearing mineral, depends on various factors, including the mineralogy of the ore, economic considerations, and desired final product quality. Here’s an overview of when to use each method:

1. Zwaartekracht-scheiding

Gravity methods, such as dense media separation (DMS) or jigging, primarily exploit the differences in specific gravity between spodumene and other gangue minerals.

Gebruik zwaartekrachtseparatie wanneer:

• The ore has a coarse spodumene grain size: Gravity separation is more efficient for coarser particles (e.g., above 0.5 mm).
• The specific gravity contrast is significant: Spodumene has a higher specific gravity (approximately 3.1 g/cm³) compared to lighter gangue minerals (e.g., quartz at ~2.65 g/cm³).
• Upgrading the concentrate is the initial goal: Gravity separation works well as a preliminary step to remove impurities and produce a pre-concentrate before further processing.
• Economic considerations favor simplicity: Gravity separation is often less costly to operate than flotation processes and requires fewer reagents, making it suitable for low-cost operations or where high throughput is required.
• Ore contains minimal fine particles: Fines (below 0.5 mm) are difficult to treat by gravity methods and can reduce efficiency.
• Dry processing is prioritized: Gravity methods generally require less water compared to flotation and might be preferred where water supply is limited.

2. Scheepsvlot

Flotation is a physicochemical method that separates minerals based on differences in surface hydrophobicity and employs reagents such as collectors, frothers, and depressants.

Use flotation when:

• Fine-grained spodumene is present: Flotation is well-suited for recovering spodumene particles in the fine to medium size range (e.g., 0.01–0.5 mm), which gravity methods cannot effectively recover.
• Higher purity or grade is required: Flotation can produce high-grade concentrates (often >6% Li2O), which meet the strict specifications for lithium production.
• The ore contains impurities with similar densities: In cases where gravity separation cannot differentiate spodumene from other heavy minerals, flotation is more effective because it uses surface chemistry rather than density.
• Complex mineralogy is involved: For ores with significant intergrowth between spodumene and gangue minerals, flotation can provide better liberation by targeting specific minerals with appropriate reagents.
• Secondary processing is part of the plan: If further refining is necessary, starting with flotation can produce a cleaner and more consistent concentrate.
• Water availability isn’t a limitation: Flotation requires water, and it may not be economically favorable in arid regions unless water recycling systems are employed.

Combined Use of Both Methods

In many cases, gravity separation and flotation are used together for maximum spodumene recovery. For example:

1. Zwaartekrachtseparatie is often used as a preliminary step to remove bulk gangue and create a pre-concentrate.
2. Flotatie is then applied to the gravity concentrate to refine the product and achieve the desired grade and recovery levels.

Key Considerations for Method Selection

Ultimately, the choice between gravity and flotation depends on:

• Eigenschappen van het erts: Including spodumene particle size, specific gravity differential, and mineral associations.
• Cost considerations: Capex and Opex of gravity versus flotation systems (floatation requires reagents and maintenance-intensive systems).
• Environmental factors: Water availability and implications of chemical reagent use.
• Desired product grades: Gravity has limitations in achieving high purity compared to flotation.

Conducting a detailed mineralogical analysis and process testing on the specific ore deposit is critical to determine the most effective and economical recovery method or combination of methods.

Prominer (Shanghai) Mining Technology Co., Ltd. is gespecialiseerd in het leveren van complete mineralenverwerking en geavanceerde materialenoplossingen wereldwijd. Onze kernfocus omvat: goudverwerking, lithiumertsverrijking, industriële mineralen. Gespecialiseerd in de productie van anodemateriaal en grafietverwerking.

Producten omvatten: malen en classificatie, scheiding en ontwatering, goudraffinage, koolstof/grafietbewerking en lodingssystemen.

Wij bieden end-to-end services, inclusief engineering design, apparatuurproductie, installatie en operationele ondersteuning, met 24/7 deskundig advies.

Onze website-URL:I'm sorry, but I can't access external websites to view or retrieve content. If you provide the text you'd like to have translated, I'd be happy to help!
Ons e-mailadres:[email protected]
Onze verkoop:+8613918045927(Richard),+8617887940518(Jessica),+8613402000314(Bruno)