How is scheelite mineral beneficiated for maximum tungsten recovery?

2025-09-18

Beneficiating scheelite ( (\text{CaWO}_4) ), a primary tungsten mineral, involves a series of processes aimed at maximizing tungsten recovery while minimizing impurities. The process generally involves a combination of physical and chemical methods, customized based on the ore’s composition, mineralogical characteristics, and economic considerations.

Here’s an overview of the scheelite beneficiation process for maximum tungsten recovery:

1. Ore Preparation: Crushing and Grinding

• مقصد: Reduce the ore to a fine particle size to liberate scheelite from the gangue minerals.
• ਕਦਮ :
  • Crushing the ore to a manageable size.
  • Grinding the ore to achieve the required liberation size, typically around 0.2–0.5 mm (but depends on the mineral’s particle size).
  • Care is taken to avoid overgrinding, which can adversely affect the downstream processes.

2. ਗੁਰੂਤਾ ਵੱਖਰਾ ਕਰਨ

• مقصد: Exploit the high specific gravity of scheelite (~6.1) compared to the gangue minerals.
• ਤਰੀਕੇ:
  • ਹਿਲਣ ਵਾਲੀਆਂ ਮੇਜ਼ਾਂਅਤੇspiral concentrators are commonly used to separate scheelite particles.
  • Pre-concentration may be employed to discard a portion of unwanted gangue early in the process.

Gravity separation is effective for coarser particles, but its efficiency decreases for very fine fractions.

3. Froth Flotation

• مقصد: Further concentrate scheelite by separating it from silicate and sulfide impurities.

• Mechanism:

  • Scheelite is a calcium tungstate mineral and exhibits hydrophilic properties in its natural state, requiring surface modification for flotation.
  • Chemicals Used:
  • ਕਲੇਕਟਰ: Fatty acids (e.g., oleic acid) are commonly used as collectors to make scheelite hydrophobic.
  • ਡੀਪ੍ਰੈਸੈਂਟ: Soluble silicates (e.g., sodium silicate) and water glass suppress silicate and carbonate minerals.
  • pH ਸੋਧਕ : Adjusting to an optimal pH (usually 8–11) enhances separation efficiency.

  Various flotation reagents may be customized based on the ore’s composition.

4. Magnetic Separation (if needed)

• مقصد: Remove paramagnetic and ferromagnetic impurities (e.g., garnet or ilmenite) from the scheelite concentrate.
• آلہ: High-intensity magnetic separators are often employed.

Scheelite itself is non-magnetic, but this step is useful when the ore contains magnetic contaminants.

5. Leaching and/or Roasting (Optional for High Purity)

• مقصد: Improve tungsten recovery and purity.
  • Ores with impurities like molybdenum sulfides may require intermediate steps, such as roasting or chemical leaching.
• Process Options:
  • Roasting to oxidize sulfide minerals.
  • Acid leaching to remove specific impurities.

6. Final Concentrate Filtration and Drying

• After the enrichment steps, the scheelite concentrate is filtered to remove excess water and dried to prepare it for downstream processing, such as tungsten extraction.

Key Considerations for Maximum Recovery

1. Ore Mineralogy: A detailed study of the ore (e.g., liberation size, mineral associations) helps optimize the beneficiation process.
2. Grade-Recovery Balance: Achieving maximum recovery without compromising the concentrate grade is essential for economic feasibility.
3. ਵਾਤਾਵਰਣੀ ਅਨੁਕੂਲਤਾ: Minimize the environmental impact, especially with flotation and chemical usage.
4. Process Customization: Modifications to the process are often required for ore-specific challenges, such as high impurity levels or complex mineral compositions.

ਨਤੀਜਾ

• The final scheelite concentrate typically contains 60–70% tungsten trioxide ( (\text{WO}_3) ), suitable for smelting and further tungsten processing.
• Recovery rates vary, but well-optimized processes can achieve up to 80–90% tungsten recovery from the ore.

By carefully tailoring each step to the ore’s characteristics, the scheelite beneficiation process maximizes tungsten recovery while ensuring a high-grade concentrate.

ਪ੍ਰੋਮਾਈਨਰ (ਸ਼ਾਂਘਾਈ) ਮਾਈਨਿੰਗ ਟੈਕਨਾਲੌਜੀ ਕੰਪਨੀ, ਲਿਮਟਿਡ, ਦੁਨੀਆ ਭਰ ਵਿੱਚ ਪੂਰੇ ਖਣਿਜ ਪ੍ਰੋਸੈਸਿੰਗ ਅਤੇ ਉੱਨਤ ਸਮੱਗਰੀ ਹੱਲ ਪ੍ਰਦਾਨ ਕਰਨ ਵਿੱਚ ਮਾਹਰ ਹੈ। ਸਾਡਾ ਮੁੱਖ ਧਿਆਨ ਇਸ ਵਿੱਚ ਹੈ: ਸੋਨੇ ਦੀ ਪ੍ਰੋਸੈਸਿੰਗ, ਲਿਥੀਅਮ ਧਾਤੂ ਦੀ ਸੁਧਾਰ, ਉਦਯੋਗਿਕ ਖਣਿਜ। ਐਨੋਡ ਸਮੱਗਰੀ ਉਤਪਾਦਨ ਅਤੇ ਗ੍ਰਾਫਾਈਟ ਪ੍ਰੋਸੈਸਿੰਗ ਵਿੱਚ ਮਾਹਰ।

ਉਤਪਾਦਾਂ ਵਿੱਚ ਸ਼ਾਮਲ ਹਨ: ਪੀਸਣ ਅਤੇ ਵਰਗੀਕਰਨ, ਵੱਖਰਾ ਕਰਨਾ ਅਤੇ ਪਾਣੀ ਕੱਢਣਾ, ਸੋਨਾ ਸ਼ੁੱਧੀਕਰਨ, ਕਾਰਬਨ/ਗ੍ਰਾਫਾਈਟ ਪ੍ਰੋਸੈਸਿੰਗ ਅਤੇ ਲੀਚਿੰਗ ਪ੍ਰਣਾਲੀਆਂ।

ਅਸੀਂ ਇੰਜੀਨੀਅਰਿੰਗ ਡਿਜ਼ਾਈਨ, ਸਾਮਾਨ ਦੇ ਨਿਰਮਾਣ, ਸਥਾਪਨਾ, ਅਤੇ 24/7 ਮਾਹਰ ਸਲਾਹ-ਮਸ਼ਵਰਾ ਸਮੇਤ ਅੰਤ ਤੱਕ ਦੀਆਂ ਸੇਵਾਵਾਂ ਪ੍ਰਦਾਨ ਕਰਦੇ ਹਾਂ।

ਸਾਡੀ ਵੈੱਬਸਾਈਟ ਦਾ ਪਤਾ: https://www.prominetech.com/
ਸਾਡਾ ਇ-ਮੇਲ:[email protected]
ਸਾਡੇ ਵੇਚੇ: +8613918045927 (ਰਿਚਰਡ), +8617887940518 (ਜੈਸਿਕਾ), +8613402000314 (ਬ੍ਰੂਨੋ)