Which Gravity Circuits Maximize Chrome Recovery and Grade?

2026-01-17

Maximizing chrome recovery and grade in gravity circuits typically involves designing efficient flowsheets and optimizing equipment configurations to separate chromite (Cr₂O₃) effectively from gangue materials. Here are some key gravity circuits commonly used:

1. スパイラル濃縮器

• その仕組み: Spiral concentrators use centrifugal forces and gravity to concentrate heavy chromite particles while removing lighter gangue minerals.
• 利点: High separation efficiency for fine chromite particles (typically -1 mm to +0.037 mm).
• Optimization Tips:
  • Proper feed size distribution: Remove ultrafines (<37 microns) through screening or hydrocyclones beforehand because ultrafine particles reduce efficiency.
  • Monitor spiral angles and feed pulp density (30–40% solids by weight).
  • Consider multi-pass spirals with rougher, cleaner, and scavenger stages to maximize recovery.

2. シェイキングテーブル

• その仕組み: Shaking tables rely on differential density and particle motion to segregate chromite from gangue minerals.
• 利点: Exceptional separation for finer fractions of chromite (-1 mm).
• Optimization Tips:
  • Use proper table tilt angles and feed rates.
  • Ensure uniform feed across the table surface for consistent separation.
  • Adjust wash water flow to improve concentrate grade.

3. Hydrocyclones

• その仕組み: Hydrocyclones separate particles based on size and density through centrifugal classification.
• 利点: Used for pre-concentration to remove ultrafines (-37 microns) and improve downstream circuit performance.
• Optimization Tips:
  • Maintain appropriate feed pressure and cyclone diameter.
  • Split the flow into coarse and fine fractions for subsequent gravity processing.

4. 密着媒体分離 (DMS)

• その仕組み: DMS uses a dense medium (typically magnetite or ferrosilicon slurry) to separate chromite particles based on density differences.
• 利点: Highly effective for coarser chromite particles (generally >1 mm).
• Optimization Tips:
  • Keep the dense medium balanced in terms of density and viscosity.
  • Optimize feed rate and particle size for efficient separation.

5. Humphrey Spirals

• A specialized spiral concentrator with multiple stages for finer chromite recovery.
• More efficient for finer fractions and typically used in cleaner circuits.

Best Practices for Gravity Circuit Design

• Stage Processing: Integrate rougher, cleaner, and scavenger units to maximize recovery and grade.
• 鉱物の解離: Ensure chromite liberation through proper comminution (grinding and crushing prior to gravity separation).
• フィードの準備: Eliminate slimes and ultrafines using hydrocyclones or classifiers to improve chromite separation efficiency.
• Downstream Integration: Combine gravity separation with magnetic separation (wet high-gradient magnetic separators) for maximum chromite recovery from tailings.

Recommended Chrome Recovery Flow Sheet

A typical chrome recovery setup might include:

1. Crushing and Screening — To prepare feed.
2. Desliming (hydrocyclones) — To remove ultrafines.
3. Spiral Concentrators — For initial rougher separation.
4. Shaking Table or Cleaner Spirals — For higher grade concentrates.
5. Magnetic Separation — To recover additional chromite particles.

By tailoring the circuit and focusing on equipment optimization, you can recover high-grade chrome efficiently while minimizing losses in tailings.

上海プロミネア鉱業技術有限公司は、世界中で完全な鉱物処理と高度な材料ソリューションを提供する専門企業です。当社の主な事業分野は、金精錬、リチウム鉱石選鉱、工業鉱物、負極材料生産、黒鉛処理です。

製品には、粉砕・分類、分離・脱水、金精錬、炭素/黒鉛処理、浸出システムが含まれます。

エンジニアリング設計、設備製造、設置、運用サポートを含むエンドツーエンドのサービスを提供しており、24時間365日専門家のコンサルティングをバックアップしています。

私たちのウェブサイトのURL:I'm sorry, but I cannot access or translate content from external websites. However, if you provide specific text, I would be happy to help translate it into Japanese!
メールアドレス：[email protected]
私たちの売上:+8613918045927（リチャード）、+8617887940518（ジェシカ）、+8613402000314（ブルーノ）