Which Processing Methods Deliver Optimal Gold Recovery Economics?

2025年12月13日

The choice of processing methods for optimal gold recovery economics depends on various factors, including the type of gold ore, its grade, mineralogy, the scale of the operation, and capital and operating cost considerations. Below, I outline key processing methods and their potential for delivering highly efficient gold recovery and economic returns:

1. Gravity Concentration

• 概要: Gravity separation exploits the differences in density between gold and other minerals in the ore. Gold, being dense, can be separated easily.
• 用途： Suitable for high-grade, coarse gold deposits (free-milling ores) and placer deposits.
• 利点：
  • Low operating and capital costs.
  • Environmentally friendly (does not require chemicals).
  • Quick and effective for coarse gold.
• 課題：
  • Ineffective for fine or refractory gold.
  • Limited recovery for gold particles less than 75 microns.

2. Cyanidation (Carbon-in-Leach or Carbon-in-Pulp)

• 概要: Cyanide is used to dissolve gold, and then activated carbon is used to adsorb the dissolved gold from the slurry.
• 用途： Effective for processing low-grade and complex ores.
• 利点：
  • High recovery rates (up to 95% for free-milling gold).
  • Widely tested and industrially established.
• 課題：
  • High environmental and regulatory compliance requirements due to cyanide use.
  • Toxicity risks and waste management challenges.

3. Heap Leaching

• 概要: Low-grade ore is crushed and stacked on an impermeable pad, where a cyanide solution is trickled over it to leach gold.
• 用途： Ideal for low-grade and large-tonnage gold deposits.
• 利点：
  • Low capital investment required for setup.
  • Cost-effective for large-scale operations.
• 課題：
  • Slower recovery process (can take months to complete).
  • Lower recovery rates compared to other methods (60–80%).
  • Environmental risks from cyanide leakage.

4. 浮選

• 概要: Gold is concentrated by separating it from sulfide and other minerals using flotation reagents.
• 用途： Effective for sulfide ores and refractory gold (where gold is finely disseminated).
• 利点：
  • Effective for complex and low-grade ores.
  • Gold concentrate can be further treated for higher recoveries.
• 課題：
  • Requires expertise to optimize flotation parameters.
  • Higher operating costs compared to gravity methods.
  • Additional processing required for gold concentrates.

5. Pressure Oxidation (POX) and Autoclaving

• 概要: These methods use high pressure and temperature to oxidize refractory ores, liberating gold.
• 用途： Gold bound within sulfides or arsenopyrite matrices.
• 利点：
  • Unlocks gold from difficult-to-treat ores.
  • Can achieve very high recoveries.
• 課題：
  • High capital and operating costs due to energy-intensive processes.
  • Specialized equipment and expertise required.

6. BIOX® (Biological Oxidation)

• 概要: Utilizes microorganisms to oxidize sulfides and liberate gold for subsequent cyanidation.
• 用途： Suitable for refractory gold ores with high sulfide content.
• 利点：
  • Environmentally friendly and less expensive compared to POX.
  • Lower operating costs for some ores.
• 課題：
  • Moderately lower recovery rates than POX for some ore types.
  • Requires tight process control and monitoring.

7. Albion Process™

• 概要: A combination of ultrafine grinding and oxidative leaching at atmospheric pressure.
• 用途： Refractory and complex sulfide ores.
• 利点：
  • Lower capital costs compared to POX.
  • Effective for certain refractory ores.
• 課題：
  • Requires fine grinding of ore, which can increase operating costs.

8. Other Emerging Technologies

• Thiosulfate Leaching: An alternative to cyanidation, useful for ores with high copper content or when cyanide use is restricted.
• Chloride Leaching: Uses chlorine-based solutions to dissolve gold, avoiding cyanide risks.
• 原位置浸出: Recovering gold directly from undisturbed ore bodies, but still less commonly used.

Factors Affecting Economic Optimization

1. Ore Type and Mineralogy: Understanding the gold’s association (e.g., free-milling vs. refractory) is critical for selecting the process.
2. 事業規模: Large-scale projects benefit from economies of scale in chemical and energy costs.
3. Cost-effectiveness: Investment requirements, operating costs, and gold price volatility are central to economic decisions.
4. Regulatory and Environmental Compliance: Cyanide-use limitations and environmental stewardship are increasingly important factors.
5. Processing Recovery Rates: Methods with high recovery rates often justify higher initial capital expenditures.

Economic Optimization in Practice:

• Simple Free-Milling Ores: Gravity concentration + cyanidation (CIL or CIP).
• 難溶性鉱石： Pressure oxidation, BIOX®, or Albion Process followed by cyanidation.
• Low-Grade Deposits: Heap leaching or flotation to concentrate and reduce costs.

最終的な考え:

An economically optimized gold recovery method typically combines multiple technologies tailored to ore characteristics and project requirements. Feasibility studies, metallurgical testing, and environmental assessments are essential in identifying the most cost-effective and sustainable option.

上海プロミネア鉱業技術有限公司は、世界中で完全な鉱物処理と高度な材料ソリューションを提供する専門企業です。当社の主な事業分野は、金精錬、リチウム鉱石選鉱、工業鉱物、負極材料生産、黒鉛処理です。

製品には、粉砕・分類、分離・脱水、金精錬、炭素/黒鉛処理、浸出システムが含まれます。

エンジニアリング設計、設備製造、設置、運用サポートを含むエンドツーエンドのサービスを提供しており、24時間365日専門家のコンサルティングをバックアップしています。

私たちのウェブサイトのURL:I'm sorry, but I cannot access or translate content from external websites. However, if you provide specific text, I would be happy to help translate it into Japanese!
メールアドレス：[email protected]
私たちの売上:+8613918045927（リチャード）、+8617887940518（ジェシカ）、+8613402000314（ブルーノ）