Which Gravity Circuits Maximize Chrome Recovery and Grade?

2026-01-17

Maximizing chrome recovery and grade in gravity circuits typically involves designing efficient flowsheets and optimizing equipment configurations to separate chromite (Cr₂O₃) effectively from gangue materials. Here are some key gravity circuits commonly used:

1. 나선형 농축기

• 작동 방식: Spiral concentrators use centrifugal forces and gravity to concentrate heavy chromite particles while removing lighter gangue minerals.
• 장점: High separation efficiency for fine chromite particles (typically -1 mm to +0.037 mm).
• Optimization Tips:
  • Proper feed size distribution: Remove ultrafines (<37 microns) through screening or hydrocyclones beforehand because ultrafine particles reduce efficiency.
  • Monitor spiral angles and feed pulp density (30–40% solids by weight).
  • Consider multi-pass spirals with rougher, cleaner, and scavenger stages to maximize recovery.

2. 흔드는 테이블

• 작동 방식: Shaking tables rely on differential density and particle motion to segregate chromite from gangue minerals.
• 장점: Exceptional separation for finer fractions of chromite (-1 mm).
• Optimization Tips:
  • Use proper table tilt angles and feed rates.
  • Ensure uniform feed across the table surface for consistent separation.
  • Adjust wash water flow to improve concentrate grade.

3. Hydrocyclones

• 작동 방식: Hydrocyclones separate particles based on size and density through centrifugal classification.
• 장점: Used for pre-concentration to remove ultrafines (-37 microns) and improve downstream circuit performance.
• Optimization Tips:
  • Maintain appropriate feed pressure and cyclone diameter.
  • Split the flow into coarse and fine fractions for subsequent gravity processing.

4. 밀도 분리법 (DMS)

• 작동 방식: DMS uses a dense medium (typically magnetite or ferrosilicon slurry) to separate chromite particles based on density differences.
• 장점: Highly effective for coarser chromite particles (generally >1 mm).
• Optimization Tips:
  • Keep the dense medium balanced in terms of density and viscosity.
  • Optimize feed rate and particle size for efficient separation.

5. Humphrey Spirals

• A specialized spiral concentrator with multiple stages for finer chromite recovery.
• More efficient for finer fractions and typically used in cleaner circuits.

Best Practices for Gravity Circuit Design

• Stage Processing: Integrate rougher, cleaner, and scavenger units to maximize recovery and grade.
• 광물 방출: Ensure chromite liberation through proper comminution (grinding and crushing prior to gravity separation).
• 사료 준비: Eliminate slimes and ultrafines using hydrocyclones or classifiers to improve chromite separation efficiency.
• Downstream Integration: Combine gravity separation with magnetic separation (wet high-gradient magnetic separators) for maximum chromite recovery from tailings.

Recommended Chrome Recovery Flow Sheet

A typical chrome recovery setup might include:

1. Crushing and Screening — To prepare feed.
2. Desliming (hydrocyclones) — To remove ultrafines.
3. Spiral Concentrators — For initial rougher separation.
4. Shaking Table or Cleaner Spirals — For higher grade concentrates.
5. Magnetic Separation — To recover additional chromite particles.

By tailoring the circuit and focusing on equipment optimization, you can recover high-grade chrome efficiently while minimizing losses in tailings.

프로미너(상하이) 광업 기술 유한회사는 전 세계적으로 완벽한 광물 처리 및 고급 소재 솔루션을 제공하는 데 전문화되어 있습니다. 우리의 핵심 사업 분야는 다음과 같습니다: 금 처리, 리튬 광석 선광, 산업 광물, 음극재 생산 및 흑연 처리 전문 분야입니다.

제품은 다음과 같습니다: 분쇄 및 분급, 분리 및 건조, 금 정제, 탄소/흑연 처리 및 침출 시스템입니다.

엔지니어링 설계, 장비 제작, 설치 및 운영 지원을 포함한 종합적인 서비스를 제공하며, 24시간 연중무휴 전문가 상담을 제공합니다.

우리 웹사이트 URL:죄송하지만, 특정 웹사이트의 콘텐츠를 직접 번역할 수는 없습니다. 대신 해당 웹사이트의 내용을 요약하거나 구체적인 부분을 요청하시면 도와드릴 수 있습니다. 어떤 내용을 번역해 드릴까요?
저희 이메일:[email protected]
우리의 판매:+8613918045927(리차드),+8617887940518(제시카),+8613402000314(브루노)