Raw Ore: Alluvial / Hard Rock Oxide Gold Ore (with free milling gold) Gold Grade: 2.5 g/t Gold Recovery Rate: > 88%
Jaw Crusher, its opening size determines its max feeding size. The crushing chamber of a jaw crusher is created by the two vertical manganese jaw plates that create a V-shaped cavity. Normally it could cooperate with pre-screen system to separate out the fine particles to cone crusher directly to improve processing efficiency.
Capacity: 50tph-1000tph
Power: 75-400KW
Jaw crusher, as a primary crusher with simple structure, is widely used in metallic and non-metallic ore crushing, gold ore, iron ore, copper ore, quartz, graphite, granite, marble, basalt, limestone, pebble, etc.
Developed to crush the hardest ores and rocks like hematite and magnetite, jaw crushers also perform outstandingly with less demanding materials.
Before gold ore enter ball mill and CIL system, normally jaw crusher and cone crusher shall process the oxide and sulfide ore into below 30mm.
Using a jaw crusher and cone crusher, quartz will undergo the crushing process, while a vibrating screen will be used to separate it.
Normally for Copper ore processing need crushing, grinding, flotation and thickening stages.
Prominer will provide crushing, grinding and classification, flotation concentration, thickening and filtration for lithium extraction.
A larger feed opening increases material intake and ensures that the rocks enter the jaw crusher’s cavity without restrictions.
A steeper nip angle decreases operating costs by reducing wear on jaw dies and speeds up material flow down in the cavity.
The jaw crushers can be upgraded with crusher automation that enable monitoring and adjusting the settings of a feeder, crusher, and conveyor remotely.
Our equipment with the main advantages as below
We upgraded the crushing cavity for bigger volume and advanced driving mechanism extend the crushing performance.
Prominer set one-button adjust system to adjust the discharge size and one-button to clear the cavity, no need to stop the production.
For the bearing, we adopt Timken, SKF world class brand as client choice, for the motor we adopt Siemens Beide.
For the main shaft, we adopt material of 40Cr, and jaw plate of ZGMn13.
Prominer design with PLC control system to integrate with other crushers and belt conveying system, make all the crushing system under remote control.
Integrated motor stands for simple and convenient installation.
Prominer can provide the service work as below
Raw Ore: Alluvial / Hard Rock Oxide Gold Ore (with free milling gold) Gold Grade: 2.5 g/t Gold Recovery Rate: > 88%
Raw Ore: Alluvial gold ore from dry river bed (Wadi) Gold Grade: 1.2 g/t Gold Recovery Rate: >92%
Raw Ore: Mixed Oxide and Sulfide Gold Ore Gold Grade: 3.5 g/t Gold Recovery Rate: 92%
Raw Ore: Spodumene Lithium Ore Li2O Grade: 1.5% Concentrate Grade: 6.0%
Raw Ore: Mixed Oxide Type Gold-Copper Ore Gold Grade: 1.5 g/t Copper Grade: 0.8%
To find out more about our products and solutions, please fll out the form below and one of our experts will get back to you shortly
3000 TPD Gold Flotation Project in Shandong Province
2500TPD Lithium Ore Flotation in Sichuan
Fax: (+86) 021-60870195
Address: No.2555,Xiupu Road, Pudong, Shanghai
Copyright © 2023. Prominer (Shanghai) Mining Technology Co.,Ltd.
