Located in Indonesia, this project focuses on the efficient regrinding of nickel ore to enhance mineral upgrading and deep processing. Prominer (Shanghai) Mining Technology Co., Ltd.
Besides strict PSD requirements, Anode Graphite also requires a spherical shape in order to perform ideally in the battery cell. Our shaping mill is specially designed for anode material production to improving the tap density and reduce the S.S.A (specific surface area) of the spherical graphite. It should work together with our impact mill or jet mill.
Capacity: 5-1200 kgs/h
Output Size: 5-100μm
It is mainly for handling the green petroleum coke (GPC coke), green needle coke, calcined petroleum coke (CPC coke), calcined needle coke, coating pitch, natural graphite.
It can handle silicon carbide, diamond, metal silicon and quartz also.
Natural graphite after spherical processing show excellent performance in terms of high-rate capacity, high reversible capacity and high coulombic efficiency.
Green needle coke”, featuring with special layered structure, high carbon content (>95%), low ash and volatile content.
Carbon Silicon proposed as one of the most promising anode materials for lithium-ion batteries due to its high theoretical lithium storage capacity.
Shaping mill for handling the green petroleum coke (GPC coke), green needle coke, calcined petroleum coke (CPC coke), calcined needle coke.
Shaping mill for improving the tap density and reduce the S.S.A (specific surface area) of the green petroleum graphite.
The practical implementation of Si anodes has been developed into nanostructured Si anode materials and Si based carbon composite anode materials.
Synthetic graphite for Lithium-Ion Battery anode material production with advantages in long cycles, high temperatures, and high rates over natural graphite.
Different anode precursor material could be tested in Prominer lab for best performance.
Our equipment with the main advantages as below
Output size between 5-100 um.
Special designed to obtain cubical or potato shape particle.
Super-hard alloy type hammer and ring with longer service life.
Suitable to handle inflammable, explosive and easily oxidative material.
Collecting efficiency up to 99.99%, Negative pressure operation without fly ash.
Fully automatic PLC control.
Prominer can provide the service work as below
Located in Indonesia, this project focuses on the efficient regrinding of nickel ore to enhance mineral upgrading and deep processing. Prominer (Shanghai) Mining Technology Co., Ltd.
Raw Ore: Sulfide Copper Ore (with minor pyrite content) Copper Grade: 1.2% Concentrate Grade 25% Cu
Capacity Target: Increase processing capacity from 500 TPD to 850 TPD in phases without halting production.
Feed Material: Historically Stockpiled Gold Tailings Tailings Gold Grade: 1.5 g/t Target Gold Recovery Rate: 88%
Raw Ore: Sulfide Copper Ore Copper Grade: 1.2% Target Flotation Recovery Rate: 92%
To find out more about our products and solutions, please fll out the form below and one of our experts will get back to you shortly
3000 TPD Gold Flotation Project in Shandong Province
2500TPD Lithium Ore Flotation in Sichuan
Fax: (+86) 021-60870195
Address: No.2555,Xiupu Road, Pudong, Shanghai
Copyright © 2023. Prominer (Shanghai) Mining Technology Co.,Ltd.
